Anchor 1510APB 15-Gauge DA Type Bright Finish Nails, 4000-Count, 1-1/4-Inch

Anchor 1510APB 15-Gauge DA Type Bright Finish Nails, 4000-Count, 1-1/4-Inch Review

Anchor 1510APB 15-Gauge DA Type Bright Finish Nails, 4000-Count, 1-1/4-Inch Feature

• Bright
• Chisel point
• Available in lengths from 1-Inch to 2-1/2-Inch
• Smooth shank
• 4,000 Nails per box

Anchor's 15 Gauge Bright Angle Finish Nails have a chisel point and come 4,000 per box. These nails fit the following tools: Spot nails XBA1564, KBA1564, Senco SFN40, SFN30, SN1, SFN1+, SFN1, SFN2B, FinishPro 35, FinishPro 41 XP, Senco Airfree 41, Duo-Fast DAFN-6480, Porter Cable DA250A, DA250B, DAFN-6480, CDA250, Craftsman 18432, Fasco R3C BA-50 CT, F3C BA-50, F4 BA-65, R4 BA-65, F4BA-65CT, Dewalt D51275, Campbell Hausfeld NB356599, Makita AF631, AF632, Jamerco JTAFN1464, Max NF550/15-65, and Hitachi NT65AA, NT65MA.BrightChisel pointAvailable in lengths from 1-Inch to 2-1/2-InchSmooth shank4,000 Nails per box

Speedway 9409 1-Quart General Purpose Spray Gun

Speedway 9409 1-Quart General Purpose Spray Gun Review

Speedway 9409 1-Quart General Purpose Spray Gun Feature

• Capacity of cup: 1 Quart
• Air inlet: 1/4 inch
• Air Consumption: 20 CFM
• Air Pressure: 50PSI
• 100% manually adjusted nozzle sets

9409 Features: -Spray gun. -Equipped with 100pct manually adjusted nozzle sets. -Ideal for your painting needs. -Capacity of cup: 1 Quart. -Air inlet size: 0.25''. -Average air consumption: 20 CFM. -Air pressure: 50 PSI. -Dimensions: 11.9'' H x 4.29'' W x 7.02'' D.

B&C Eagle SN3490 2-Inch to 3-1/2-Inch Paper Tape 31 to 34 Degree Framing Nailer

B&C Eagle SN3490 2-Inch to 3-1/2-Inch Paper Tape 31 to 34 Degree Framing Nailer Review

B&C Eagle SN3490 2-Inch to 3-1/2-Inch Paper Tape 31 to 34 Degree Framing Nailer Feature

• Rear load magazine
• Adjustable exhaust deflector (tool free 360 Degree)
• Weight: 7.0lbs
• Toe nail safety with removable No-Mar tip
• Selectable trigger sequential to contact trip actuation

The B&C Eagle SN3490 paper tape framing nail gun features a lightweight aluminum housing without compromising the power needed to drive a 2-inch to a 3-1/2-inch framing nail. With a soft rubber grip, the tool offers comfort and stability without increasing fatigue. The SN3490 has a built-in trigger selection which allows you to choose quickly and easily between single fire and bump fire nailing. The SN3490 has a convenient rear load magazine to replenish quickly to avoid loss of time. Other SN3490 convenient features include a tool free adjustable depth of drive, connected rafter hook and a no-mar tip. A 360 degree directional cap gives you the freedom to direct the flow of the exhaust away from your face while working. The low nail lock out feature indicates when re-loading is required without the added tool wear and wasted time of dry firing. All of these items combined make the B&C Ea

Porter-Cable FC350A Clipped Head 2-Inch to 3-1/2-Inch Framing Nailer

Porter-Cable FC350A Clipped Head 2-Inch to 3-1/2-Inch Framing Nailer Review

Porter-Cable FC350A Clipped Head 2-Inch to 3-1/2-Inch Framing Nailer Feature

• Uses 30 degree to 34 degree 2-inch to 3-1/2-inch by .113-inch to .131-inch paper collated clipped-head framing nails
• Power to drive nails (up to 3-1/2-inch by .131-inch) into engineered lumber
• Compact body design for better balance and style
• Consistent power on every shot with internal piston catch mechanism
• Selectable trigger - restrictive or contact actuation mode; Tool-free depth-of-drive adjustment with detents for proper setting of nail heads

With its innovative aluminum magazine design, compact size, and rounded body, the FC350A framing nailer from Porter-Cable offers powerful, reliable performance for all your fastening jobs, from wood floors to fences. Balanced and easy-to-handle, the FC350A features a 30- to 34-degree collated clipped head, resists both misfires and jams, and allows you to change from single fire to bump mode without taking off the entire trigger assembly. A built-in piston catch ensures a continuous flow of power and it's also a snap to alter both the depth-of-drive and the exhaust. The FC350A frames nails 2- to 3-1/2 inches long.

Senco SN902XP Full Round Head Framing Nailer

Senco SN902XP Full Round Head Framing Nailer Review

Senco SN902XP Full Round Head Framing Nailer Feature

• Weighs only 7.3-pounds, lightweight and well balanced
• Uses up to 15-percent less air then other competitors tools due to a highly efficient internal design
• Patented True Drive magazine reduced jams and misfeeds
• Low profile design has an 11.7-inch height, easily fits between studs and joists
• Patented switchable trigger and drive selector, contact or sequential

Featuring an ultra-efficient design that uses up to 15-percent less air than other competitors' tools, the Senco SN902XP Full Round Head Framing Nailer boasts a lightweight, compact design that easily fits between joists and studs. It drives two-inch to 3-1/4-inch round head plastic collated framing nails quickly and efficiently while minimizing user fatigue.

The Senco SN902XP Full Round Head Framing Nailer: Fits between joists and studs with a compact size. Has great versatility allowing it to complete a wide variety of jobs. Can be conveniently transported via built-in rafter/belt hook.

Nails are instantly fed into position, so the SN902XP is always ready to go. View larger.

Use the framing nailer for a wide variety of home improvement jobs. View larger.

Low-Profile, Easy-Load Design
Weighing in at only 7.3 pounds, with a low-profile height of 11.7 inches, the SN902XP is well-balanced and easy to handle and hold, even in tight spots. Easy to operate, this tool lets you load and unload the nails from the rear of the magazine, and they instantly feed smoothly into position, so the SN902XP is ready to go when you are. Changing the trigger from sequential fire to rapid fire is equally straightforward: simply depress and slide a button--no need to replace the entire trigger.

Designed for Versatility, Precision, and Efficiency
Incredibly versatile, the SN902XP boasts an aggressive sawtooth safety for toenailing, an adjustable drive depth for precision, and a patented TrueDrive magazine that guards against time-wasting jams. Use it for a wide variety of jobs, including trusses, framing, and subfloors. It's also ideal for putting up outdoor fences and building backyard decks.

Comfortable, Ergonomic Design
Designed to handle serious all-day work, the SN902XP is packed with user-friendly features that help keep you going longer. A durable yet lightweight aluminum frame offers a molded comfort hand grip, while updated internal drive components mean more efficient results. There's also a built-in rafter/belt hook for convenient portability.

The SN902XP is backed by a five-year warranty.

About Senco
For over 50 years, Senco Products, Inc. has provided high-quality products to make it easier for both professionals and remodelers to complete a wide variety of renovation, construction, and industry work. Based in Cincinnati, Ohio, with distributors worldwide, Senco is one of the leading manufacturers of pneumatic and powered fastening systems, as well as the fasteners they drive. Their tools boast superior workmanship and are used in a variety of industries, including home construction and remodeling, cabinet and furniture assembly, manufactured housing and industrial packaging.

Weighing just 7.3 lb., the lightweight and well balanced FramePro 902XP is the ultimate framing nailer. It's compact size allows it to fit easily between studs and joists. Uses up to 15% less air than other competitors tools due to a highly efficient internal design. Patented True Drive magazine reduces jams and misfeeds. Patented switchable trigger and drive selector allows the operator to easily switch between contact and sequential fire modes. Shoots all full round head plastic collated framing nails from 2'' to 3 1 4''.

B&C Eagle SN2290 2-Inch to 3-1/2-Inch Full Round Head Plastic Strip 20 to 22 Degree Framing Nailer

B&C Eagle SN2290 2-Inch to 3-1/2-Inch Full Round Head Plastic Strip 20 to 22 Degree Framing Nailer Review

B&C Eagle SN2290 2-Inch to 3-1/2-Inch Full Round Head Plastic Strip 20 to 22 Degree Framing Nailer Feature

• Rear load magazine
• Adjustable exhaust deflector (tool free 360 Degree)
• Weight: 7.0lbs
• Toe nail safety with removable No-Mar tip
• Selectable trigger sequential to contact trip actuation

The B&C Eagle SN2290 full round head plastic strip framing nail gun features a lightweight aluminum housing without compromising the power needed to drive a 2-inch to a 3-1/2-inch plastic collated framing nail. With a soft rubber grip, the tool offers comfort and stability without increasing fatigue. The SN2290 has a built-in trigger selection which allows you to choose quickly and easily between single fire and bump fire nailing. The SN2290 has a convenient rear load magazine to replenish quickly to avoid loss of time. A 360 degree directional cap gives you the freedom to direct the flow of the exhaust away from your face while working. Other convenient SN2290 features include a tool free adjustable depth of drive, connected rafter hook, and no-mar tip. The low nail lock out feature indicates when re-loading is required without the added tool wear and wasted time of dry firing.

4 Pack Hitachi NV65AH 1-1/2" to 2-1/2" Siding Nailer Plastic Sheet Wire Coil Collation

4 Pack Hitachi NV65AH 1-1/2" to 2-1/2" Siding Nailer Plastic Sheet Wire Coil Collation Review

4 Pack Hitachi NV65AH 1-1/2" to 2-1/2" Siding Nailer Plastic Sheet Wire Coil Collation Feature

• Depth of drive adjustment
• Drives wire and plastic sheet collated nails for added flexibility
• Lightweight and compact for easy maneuverability , only 4.6 pounds
• Plastic shield, deflects wire collation for added safety
• Long-lasting rubber grip, for added comfort

The NV65AH Siding Nailer. Features: 4.6lbs, lightweight and compact for easy maneuverability. Depth of drive adjustment to countersink or flush drive nails. Drives wire and plastic sheet collated nails for added flexibility. Adjustable air deflector, directs the air exhaust in any direction. No mar nose cap attachment protects material from accidental marks. Plastic shield, deflects wire collation for added safety. Long-lasting rubber grip, for added comfort. Optional accessory(Not Included): single trip trigger mechanism. Includes: Safety Glasses, Hex Bar Wrenches. Specifications: Fastener Type - Coil, Wire/Plastic Sheet Collation. Magazine Angle - 16-Degrees. Fastener Length Capacity - 1-1/2" to 2-1/2". Fastener Diameter Range - 0.090" to 0.099". Magazine Capacity - 200-300. Side Magazine Loading. Air Inlet - 3/8" NPT. Operating Pressure - 70-120psi. Actuation - Contact. Air Consumption - 0.049(FT3/Cycle@100psi). L x W x H - 10-1/2" x 5-1/6" x 11-13/16". Tool Weight - 4.6lbs.

Generic 18 Gauge Air Nailer & Brad Gun - 5/8-Inch to 2-Inch

Generic 18 Gauge Air Nailer & Brad Gun - 5/8-Inch to 2-Inch Review

Generic 18 Gauge Air Nailer & Brad Gun - 5/8-Inch to 2-Inch Feature

• Outstanding value in a quality-built, essential 18-ga. air nailer
• Strong and lightweight (3.5lb) die-cast aluminum body for durability, rubber soft-grip for sure hold
• Quickly drives nails brads from 5/8" to 2" quick-release magazine holds up to

Outstanding value in a quality-built, essential 18-ga. air nailer 10 gauge air nailer and brad gun.

Hitachi Gas Fuel Rods for Finish Nailers - Six 2-Pks., Model# 728982D

Hitachi Gas Fuel Rods for Finish Nailers - Six 2-Pks., Model# 728982D Review

Hitachi Gas Fuel Rods for Finish Nailers - Six 2-Pks., Model# 728982D Feature

• Easily inserts into framing nailer
• For use with Models NR90GR (Item# 335960) and NR90GC2 (Item# 335959)
• Can also be used with Paslode cordless nailers

Hitachi's Gas Fuel Rod are designed for use in gas-powered framing nailers. Each rod provides approximately 1200 fastenings. Fastener Capacity Per Strip: 1,200, Coil or Strip: Strip

Hardcore Tools Pneumatic Floor Cleat gun Kit

Hardcore Tools Pneumatic Floor Cleat gun Kit Review

Hardcore Tools Pneumatic Floor Cleat gun Kit Feature

• Our 2 in 1 Flooring Cleat Nailer / Stapler tackles virtually all thickness of hardwood flooring.
• Includes a non-marring base system to protect against damage. Loading the fastener is quick and easy
• The direction/angle of the staple/cleat will be automatically aligned for precision driving.
• We ONLY ship TOOLS inside USA via fedex ground. SAVE MONEY DO IT YOURSELF 4 CHEAPER!
• Returns for UNUSED PRODUCT in ORIGINAL PACKAGING. MUST be within 7 DAYS from the date of PURCHASE.

Our Two-in-One Hardwood Flooring Stapler and Cleat Nailer lets you shoot both staples and cleat nails from the same gun without changing magazines. *Own your own professional craftsman grade tool for less than the cost of one or two weeks of tool rental. For ease of use, its durable, die-cast alloy body is lightweight and comfortable to hold. *Do a professional installation of your beautiful hardwood flooring faster and easier. This is suitable for virtually all thickness of hardwood flooring (1/2 inch, 5/8 inch, 3/4 inch, and 25/32 inch). It comes with two nylon composite base plates. Simply install the appropriate base plate for your application. *Our high-speed hardwood flooring, 2 in 1 pneumatic (powered by air compressor) cleat nailer / stapler is designed to install tongue and groove flooring using 1" to 2" Length L-shaped cleat nails or staples on flooring thickness 1/2" 5/8" 3/4" or 25/32". * Technical Information: -Minimum Operating Air Pressure: --60 PSI 4 bar Maximum Operating Air Pressure: 100 PSI --7 bar Staple Length Range: 1" - 2" 25.4 mm-50.8 mm -- Staple Size: 16 Guage Staple Capacity :92 L-shaped Nail Length Range: 1-1/2" to 2" 38.1 mm-50.8 mm L-shaped --Nail Size: 15-1/2 L-shaped Nail Capacity:100 Air Inlet:1/4 inch NPT 6.35 mm Air Consumption: 4.5 CFM 4.5 CFM *Package Includes: Carrying Case 2 in 1 Flooring Cleat Nailer -- Stapler Mallet --Safety Glasses --Air Tool Oil Base Plate --S3 Hex Key --S4 Hex Key -- S5 Hex Key Wrench --Special Instruction Manual *Operates with any standard compressor using pressure of 60 to 100 psi. **High-capacity magazine reduces reload time. **Precisely drives staples at proper angle and depth. QUALITY PRODUCTS @ QUALITY PRICES WHEN YOU SHOP WITH STERLINGTEK!!! The Hard Core Tools/SterlingTek name/images/and contents of this SterlingTek listing are protected by trademarks and copyrights. Copyright © 2011 SterlingTek.

Grex 18ga 2in Nailer Green Buddy

Grex 18ga 2in Nailer Green Buddy Review

Grex 18ga 2in Nailer Green Buddy Feature

• Size 9- 1/2"L x 9- 1/4"H x 2"W
• Weight 2.9 lbs.
• Operating Pressure 70 - 120 PSI
• Fastener Type 18-Gauge Brad Nails; Fastener Range 1/2" - 2"
• Fastener Capacity 1 strip (approx. 100 brads); Air Inlet 1/4" NPT male plug

The 18-gauge brad nailer is the most go-to nailer on your bench, in your toolbox or hanging on your wall. But its hard to find a decent one these days. Presenting the Green Buddy, a real game changer! From trim carpentry to cabinetmaking, Green Buddy will be a differentiator in every field. Its the solution if youre looking for control, precision, performance and dependability. Superior internal construction ensures smooth, accurate operation. The one-piece hardened steel driver design is precision machined and works in conjunction with the precision machined, anodized internal cylinder and piston valves for robust performance. This brad nailer also gives the user the options to select between sequential or contact trigger applications.The rear exhaust directs unwanted air away from you and the workpiece. All of these features combine for optimal balance, performance and durability. Applications: Trim and moldings, cabinet assembly, furniture and cabinet finish work, jig fixtures, light wood assembly, planar boxes, paneling, window beading, scribe molding, door and window casings, and picture frame assembly.

DEWALT D51238K 5/8-Inch to 2-Inch 18-Gauge Brad Nailer

DEWALT D51238K 5/8-Inch to 2-Inch 18-Gauge Brad Nailer Review

DEWALT D51238K 5/8-Inch to 2-Inch 18-Gauge Brad Nailer Feature

• Tool-free depth adjustment assists in locating the perfect depth setting for precise nail penetration
• Side low-nail indicator window allows user to quickly and easily see when it is time to re-load
• Overmolded no-mar pad increases visibility and reduces marring on material
• Tool-free jam clear eliminates down-time from bent fasteners caught in the nosepiece
• Tool-free 360 degree exhaust channels air and dust away from user; Trigger lock-off allows trigger to be disabled when not in use

The DeWalt D51238K 5/8-inch-to-2-inch 18-gauge Brad Nailer comes with tool-free depth adjustment assists for easily locating the ideal depth setting. Features include a side low-nail indicator window to quickly and easily see when it's time to reload, and an overmolded no-mar pad for greater visibility and durability. A tool-free jam clearing eliminates downtime from bent nails caught in the nosepiece, and a tool-free 360-degree exhaust channels air and dust away from user. Also included with this nailer is a trigger lock-off that allows the trigger to be disabled when not in use. This brad nailer comes with a pair of DeWalt safety glasses, an Allen wrench, and a heavy-duty kit box.