Air Palm Nailer

Air Palm Nailer Review

Air Palm Nailer Feature

• Drives most common nails up to 4-3/4" long
• Adjustable depth control for quick countersink adjustment Triggerless
• Lightweight die cast aluminum body
• Working air pressure: 90 PSI Air inlet: 1/4"-18 NPT

This air palm nailer quickly drives nails without the strain of swinging a hammer. No expensive stick or coil nails required. Drives most common nails up to 4-3/4" long Magnetic tip keeps nails in place Adjustable depth control for quick countersink adjustment Triggerless Lightweight die cast aluminum body Comes with leather cover Load capacity: 1 piece Gauge: 14 / 5d-70d Average air consumption: 0.2 CFM @ 90 PSI Working air pressure: 90 PSI Air inlet: 1/4"-18 NPT Weight: 0.8 lbs. Dimensions: 4.19" L x 2.29" W x 2.75" H Application Guide: General purpose nailing Shipping Weight: 2.25 lbs.

Paslode T250A 16-Gauge Pneumatic Angled Finish Nailer no. 500910

Paslode T250A 16-Gauge Pneumatic Angled Finish Nailer no. 500910 Review

Paslode T250A 16-Gauge Pneumatic Angled Finish Nailer no. 500910 Feature

• Paslode 16-gauge Pneumatic Angled Trim Finish Nailer drives angled finish 1-1/4- to 2 1/2-Inch nails
• Use for baseboard and shoe molding, cabinetry, chair rails, crown molding, door and window casings, door jambs and stops, paneling, stair assemblies and Pick-up, and and service work
• Angled magazine allows the professional to reach tighter spots than with straight finish tools and easier access to corners
• Comfortable soft textured grip; comes with case
• Lightweight at 3.8-Pound; backed by 1-year manufacturers warranty

T250A-F16, 1-1/4' To 2-1/2', Pneumatic Angled Finish Gun Nailer, 16 Gauge, Angled Finish Nails, Comes With Rugged Plastic Carrying Case, Safety Glasses & Extra No-Mar Tip, This Paslode Finish Nailer Features A Tool Free Adjustable Depth Of Drive For Precise Control Of Nail Depth, No-Mar Tip To Protect Trim Surfaces & Finishes & New Compact Angled Magazine For Easier Access Into Hard To Reach Areas, Is Great For Door & Window Trim, Paneling, Baseboard, Casing, Crown Molding, Cabinetry & Door Jambs, Comes With Case, 1 Year Manufacturers Warranty.

Bostitch FN1664K 16-Gauge Straight Finish Nailer

Bostitch FN1664K 16-Gauge Straight Finish Nailer Review

Bostitch FN1664K 16-Gauge Straight Finish Nailer Feature

• Oil-free engine: requires no daily maintenance and eliminates risk of oil stains on work surfaces
• Selectable trigger system: easy conversion between sequential or contact modes. Trigger lockout mode for use when working in occupied spaces
• Dial-A-Depth control: quickly and conveniently set fasteners to desired depths
• Swivel air fitting: increased maneuverability. Filtered air inlet for improved engine durability.
• Reversible belt hook: with integrated pencil sharpener for ultimate convenience

Bostitch FN1664K Factory-Reconditioned 16-Gauge Finish Nailer Kit - 1 to 2-1/2-Inches

Features:

* Oil-free operation requires no regular maintenance and eliminates the risk of oil stains
* Selectable trigger system converts from sequential to contact operation
* Low nail lockout prevents dry firing
* Swivel air fitting with internal filter improves maneuverability
* Ultra-quiet rear exhaust with muffler directs air away from the user
* Reversible belt hook with integrated pencil sharpener
* Dial-A-Depth™ control for precise countersinking
* Lightweight magnesium design for added durability
* Quick release nosepiece for fast and easy jam clearing

Specifications:

* Weight: 3.9-Pounds, 1.77 kilos
* Driving Power: 285 Inch-Pounds
* Magazine Capacity: 100 16GA Finish Nails (1-1/4 to 2-1/2-Inches)

What's In The Box:

* Bostitch FN1664KR 16-Gauge Finish Nailer Kit
* Carrying Case

DEWALT D55140BN 2-Inch Brad Nailer/1-Gallon Compressor Combo Kit

DEWALT D55140BN 2-Inch Brad Nailer/1-Gallon Compressor Combo Kit Review

DEWALT D55140BN 2-Inch Brad Nailer/1-Gallon Compressor Combo Kit Feature

• One-gallon tank and 135 max PSI enables more nails to be fired and provides quicker recovery
• Durable oil-free pump provides extended maintenance-free operation
• 71 dBA operational noise level for a quieter work environment
• Low 2.6-amp draw motor provides easy start-up and reduces breaker tripping
• Lightweight (24 pounds), thin (9 inches), and compact design is easy to carry and store

With an 18-gauge brad nailer, an oil-free compressor, and all the fittings you need to get set-up, this kit from DeWalt makes it easy tackle a wide range of finish carpentry and woodworking tasks, from crafting custom furniture to securing molding in place. The nailer can handle 110 straight collated nails from 5/8-inch to 2-inches at a time, and it offers tool-free jam clearing, so a bent or damaged fastener never brings work to a standstill for long. With 360-degree exhaust, a depth adjustment thumb wheel that allows you to pick setting quickly and without any special tools, a low-nail indicator window, an over-molded no-mar pad, and a trigger lock for improved safety, this easy-to-handle tool offers lots of on-the-job convenience.

Featuring a 1-gallon tank and 2.6 Amp motor that delivers a maximum of 135 PSI, high-surge performance, reduced breaker tripping, and quick recovery, the compressor in this kit is surprisingly quiet. And you can count on its durability with details like an oil-free, long-life pump, which ensures smooth, maintenance-free operation that never results in oil spilled on sensitive work surfaces, a thoughtful roll-cage design. At just 24 pounds and nine inches wide, this compact unit is easy to move around the jobsite and to store. It also offers a quick coupler for easy connection to your nailer.

Factory-Reconditioned Bostitch U/F28WW Clipped Head 2-Inch to 3-1/2-Inch Framing Nailer with Magnesium Housing

Factory-Reconditioned Bostitch U/F28WW Clipped Head 2-Inch to 3-1/2-Inch Framing Nailer with Magnesium Housing Review

Factory-Reconditioned Bostitch U/F28WW Clipped Head 2-Inch to 3-1/2-Inch Framing Nailer with Magnesium Housing Feature

• Lightweight magnesium housing weighs only 7.7 lbs
• More power: 1050 inch lbs for engineered lumber
• Tool free adjustable exhaust
• 4 stick magazine: holds up to 100 nails
• Patented push-button depth of drive

This is a factory reconditioned product. Reconditioned generally means that the product has been returned to the manufacturer, who brings the product back to like new condition. Some products may contain cosmetic blemishes. Includes Wire Weld Framing Nailer - U/F28WW

WEN 61720 3/4-Inch to 2-Inch 18-Gauge Brad Nailer

WEN 61720 3/4-Inch to 2-Inch 18-Gauge Brad Nailer Review

WEN 61720 3/4-Inch to 2-Inch 18-Gauge Brad Nailer Feature

• 18-gauge brad nailer fires brads 3/4 to 2 inches in length
• Operates at 60-100 psi with a 1/4-inch NPT air inlet fitting
• Rubber-wrapped handle; quick-release for jam-clearing; aluminum body
• Magazine holds 100 brads; includes oil, wrenches, and custom case
• Tool weighs 5.4 pounds

The 18-gauge brad nailer from WEN fires 18-gauge brads 3/4 to 2 inches in length. It features an adjustable exhaust deflector, a rubber-wrapped handle, a quick-release for jam-clearing, an aluminum body, and a magazine window that shows the remaining brad count. The magazine holds 100 brads, and the tool operates at 60-100 psi with a 1/4-inch NPT air inlet fitting. This kit includes oil, adjusting wrenches, and a custom carrying case.

Porter-Cable FN250C 1-Inch to 2-1/2-Inch 16-Gauge Finish Nailer

Porter-Cable FN250C 1-Inch to 2-1/2-Inch 16-Gauge Finish Nailer Review

Porter-Cable FN250C 1-Inch to 2-1/2-Inch 16-Gauge Finish Nailer Feature

• Maintenance-free motor designed to deliver long life
• Internal piston catch for consistent max power on every shot
• Tool-free depth-of-drive adjustment with detents for proper setting of nail heads
• Drives 16 ga. FN style finish nails from 1-inch to 2-1/2-inch length; Tool-free jam release mechanism for easy nail removal
• Included with nailer: 1,000 16-guage 2-inch finish nails, 1/4-inch fitting, safety glasses, and carrying case

The Porter-Cable FN250C 1-to-2-1/2-inch 16-gauge Finish Nailer comes with a maintenance-free motor for added reliability and long tool life. With the ability to drive 16-guage "FN" style finish nails from 1 to 2-1/2 inches long, this brad nailer features an internal piston catch for consistent maximum power on every shot and a rear exhaust to keep contaminates away from work. Also included is a tool-free depth-of-drive adjustment with detents for proper setting of nail heads, tool-free jam release mechanism for easy nail removal, and a sequential style trigger with a lock off switch. Other features include a contact safety located behind the driver guide for better visibility, an adjustable belt hook, an integrated rubber grip for improved comfort, and a low nail reload indicator. With a 100-nail magazine (which can be loaded rear load and lock style), this nailer's sequential style trigger with lock off switch operates at 70-to-120 PSI for added versatility. Its strong and lightweight die-cast aluminum body Measures 10.6 x 11.8 inches and weighs 3.85 pounds.

CADEX 23 Gauge Slight Headed Brad Nails, 1-3/16" x 4000 pk

CADEX 23 Gauge Slight Headed Brad Nails, 1-3/16" x 4000 pk Review

CADEX 23 Gauge Slight Headed Brad Nails, 1-3/16" x 4000 pk Feature

• 1-3/16" (30MM) 23 Gauge Slight Headed Brads, 4000 pk
• Significantly more holding power than straight pins, but a fraction the size of an 18 gauge head
• Well made product from Cadex, manufactuer of high grade finish nailers

23 gauge brads are a new addition to the fine finishing market place, and fill the gap between the 23 gauge fine wire pins and an 18 gauge brad. They offer significantly more holding power than the straight pin, but the head is still a fraction the size of an 18 gauge brad. This is ideal in situations where greater holding power is required than is provided by the straight pins, but still require the minimal marking in the wood being fastened.

Please note: 23 gauge brads will only work in tools specifically designed to accept them, including the Nikle 1-3/16" and 1-9/16" 23 gauge pinners, and the Cadex 1-3/16" and 2" 23 gauge pinners.

ITW Ramset Red Head 7505012 Trakfast Battery Pack

ITW Ramset Red Head 7505012 Trakfast Battery Pack Review

7505012 Ramset Battery for TF1100 Trakfast Tool

Freeman PBR50 18 Gauge 2-inch Brad Nailer

Freeman PBR50 18 Gauge 2-inch Brad Nailer Review

Freeman PBR50 18 Gauge 2-inch Brad Nailer Feature

• Anodized aluminum and oilless parts for extended wear
• Reversible belt hook
• Anodized aluminum rail
• Reload indicator
• 7 year limited warranty

The Freeman 18 Gauge, 2 Brad Nailer is perfect for those woodworking projects that need a higher degree of fastening strength. With a range of 3/8 up to 2, there is no project too big or too small for the 2 Brad Nailer from Freeman. The lightweight ergonomic design provides a good feel for the perfect balance during operation. This brad nailer operates on 60-100psi and utilizes Teflon O-rings to insure a longer life and trouble free operation. Uses standard 18 gauge brad nails and offers a seven-year limited warranty. Package includes: Reversible belt hook, goggles, oil, wrenches.

Porter-Cable BN200B 5/8-Inch to 2-Inch 18-Gauge Brad Nailer

Porter-Cable BN200B 5/8-Inch to 2-Inch 18-Gauge Brad Nailer Review

Porter-Cable BN200B 5/8-Inch to 2-Inch 18-Gauge Brad Nailer Feature

• Long life maintenance-free motor to keep from staining the work surface
• Internal piston catch for consistent max power on every shot
• Rear exhaust to keep contaminants away from work
• Drives 18 ga. nails from 5/8-inch to 2-inch length; Tool-free depth-of-drive adjustment with detents for proper setting of nail heads
• Measures 9-3/4by10.4 inches; weighs 2.6 pounds

The Porter-Cable BN200B 5/8-to-2-inch 18-gauge Brad Nailer comes with a maintenance-free motor for added reliability and long tool life. With the ability to drive 5/8-to-2-inch 18-gauge nails, this brad nailer features an internal piston catch for consistent maximum power on every shot and a rear exhaust to keep debris away from the work piece. Also included is a tool-free depth-of-drive adjustment with detents for proper setting of nail heads, a tool-free jam release mechanism for easy nail removal, and a sequential style trigger with a lock off switch. Other features include a contact safety located behind the driver guide for better visibility, an adjustable belt hook, an integrated rubber grip for improved comfort, and a low nail reload indicator. With a 100-nail magazine, this nailer operates at 70-to-120 PSI for added versatility. Its strong and lightweight die-cast aluminum body measures 9-3/4 x 10.4 inches and weighs 2.6 pounds.

Bostitch RN46 3/4-Inch to 1-3/4-Inch Coil Roofing Nailer

Bostitch RN46 3/4-Inch to 1-3/4-Inch Coil Roofing Nailer Review

Bostitch RN46 3/4-Inch to 1-3/4-Inch Coil Roofing Nailer Feature

• 3/4-inch to 1-3/4-inch coil roofing nailer with lockout mechanism prevents firing when empty
• Adjustable depth control, full round driver, body and magazine wear guards, side-load canister
• Durable yet lightweight magnesium housing and carbide tips for long life
• 10.6 inches by 10.5 inches by 4.6 inches; weights 4.8 pounds
• Backed by seven-year limited warranty

Lightweight and durable, the Bostitch RN46-1 Coil Roofing Nailer is an ideal tool for roofing, exterior drywall, insulation board, and fiber cement applications. With a patented side-loading canister, zero nail lock-out, easy depth of drive adjustments, and aggressive performance, the RN46-1 is a must-have tool for professional construction workers, builders, roofers, and anyone looking for long-lasting performance from a coil nailer.

Coil Roofing Nailer At a Glance: Tool-less depth-of-drive adjustments Zero nail lockout eliminates dry firing Patented single-action side load canister for fast loading Magnesium construction for maneuverability and durability

The Coil Roofing Nailer is ideal for roofing, exterior drywall, insulation board, and fiber cement applications. View larger.

This nailer is compatible with Stanley Bostitch CR2DCGAL Galvanized Coil Roofing Nails.

Powerful and Accurate Nail Delivery
Amazingly powerful, the RN46-1 is capable of delivering 410 in./lbs. of force at 100 psi. And with the ability to drive up to 100 nails per minute, the RN46-1 offers two firing methods: contact trip and sequential trip. Contact trip uses a bouncing motion along the workpiece and is great for working on large areas, such as roofs. Sequential trip firing is for precision applications, such as finish work. For shingle work, the RN46-1 features an integrated, tool-less gauge used to control shingle spacing.

Sequential trip firing is for precision applications, such as finish work. For shingle work, the RN46-1 features an integrated, tool-less gauge used to control shingle spacing.

Get the Right Depth for the Job
The RN46-1 allows for fast, tool-less depth-of-drive adjustments with its integrated depth dial. The dial has five different settings for finding the perfect driving depth for the job, including flush mount driving, shallow driving, and countersinking.

High-Capacity, Quick-Load Magazine Reduces Downtime
To help eliminate downtime, the RN46-1 has a high-capacity magazine that holds up to 120 coil nails. It accepts nails with a shank diameter of 0.120 and a length of 3/4 inch to 1-3/4 inch.

A zero nail lock-out feature eliminates dry firing when the magazine is empty, and it also indicates when it is time to reload. What's more, a patented single-action side-load canister allows for quick and easy nail loading. You simply slide the magazine door open, load the new coil of nails, and close the magazine door--it's that easy.

Designed for Comfort and Durability
The RN46-1 Coil Roofing Nailer is constructed of tough magnesium for durability on the jobsite. What's more, magnesium is lightweight, so this nailer is easy on your arms.

The nosepiece features a carbide insert for durability and long tool life, while wear guards and skid pads provide protection from damage caused by working on abrasive surfaces.

The over-molded grip provides maximum comfort and gripping ability in any weather condition. That means this roofing nailer can be used for a variety of different applications--inside and out--including exterior drywall, vapor barrier installation, vinyl siding, fiber cement siding, composition roofing, and more.

The Bostitch RN46-1 Coil Roofing Nailer measures 10-1/2 x 4-5/8 x 10-5/8 inches (LxWxH) and weighs 4.8 pounds. It is backed by a seven-year limited warranty.

About Bostitch
Stanley-Bostitch manufactures top-quality, innovative fastening tools and fasteners for industrial, construction, and home-improvement applications. Products include pneumatic staplers and nailers; compressors; manual staplers and tackers; coil-fed screw systems; rivet tools; glue guns; a broad assortment of collated nails, screws, staples and specialty fasteners in a variety of materials and finishes; as well as carton-closing staplers--many of them industry firsts.

What's in the Box
RN46-1 Coil Roofing Nailer.

DEWALT DC628K XRP 1-1/4-Inch to 2-1/2-Inch 15-Gauge 34 Degree Angled Finish Nailer

DEWALT DC628K XRP 1-1/4-Inch to 2-1/2-Inch 15-Gauge 34 Degree Angled Finish Nailer Review

DEWALT DC628K XRP 1-1/4-Inch to 2-1/2-Inch 15-Gauge 34 Degree Angled Finish Nailer Feature

• Engine design allows the tool to work as fast as the end user with consistent nail penetration into both soft and hard joints
• Sequential operating mode allows for precision placement and the bump operating mode provides the user with production speed.
• Easy access to the nosepiece for the removal of jammed nails without the use of screwdrivers or tool wrenches
• Contact Trip Lock-Off allows trigger to be disabled when not in use
• Integrated LED lights for long life and durability; Top cap is impact resistant and easy to remove for troubleshooting

Harness the power and efficiency of pneumatic nailing with the DeWalt DC628K heavy-duty 15-gauge 34-degree angled finish nailer. Designed to work with ANY DeWalt 18-volt battery, this nailer provides fast, consistent nail penetration in both soft and hard materials. You can select sequential operating mode to ensure precision placement of each nail or a bump operating mode that allows you to harness top speed. A unique engine design allows this tool to work as fast as you do, firing up to four or five nails a second for increased productivity. And at just 8.8 pounds, this tool is lightweight for easy maneuvering and reduced operator fatigue. Whatever you're working on, you'll appreciate the little details that separate this intuitively designed tool from similar nailers. Integrated LED lights make it easy to ensure accuracy. An easy-to-operate contract trip lock-off disables the trigger when the tool is not in use for improved safety. The nosepiece is easy to access and clear tool-free if a nail jam occurs. And a six-position dial makes it simple to move between several applications without stopping to re-acquire exact depth settings, saving you time. Additionally, the 34-degree angled, rear-load magazine is easy to handle for quick refills, and it will accept up to 110 DeWalt 34-degree nails. Included in this kit is a one-hour charger, an 18-volt XRP battery, a reversible belt hook that accommodates right- and left-handed workers, a no-mar tip, safety glasses, and a kit box for easy storage.

Factory-Reconditioned Bostitch U/SB-2IN1 2-In-1 Narrow Crown Stapler/18-Gauge Brad Nailer

Factory-Reconditioned Bostitch U/SB-2IN1 2-In-1 Narrow Crown Stapler/18-Gauge Brad Nailer Review

Factory-Reconditioned Bostitch U/SB-2IN1 2-In-1 Narrow Crown Stapler/18-Gauge Brad Nailer Feature

• Reconditioned Bostitch Products have a One-year warranty through the Bostitch factory or an authorized service center
• 5/8- to 1-5/8 18-gauge brad nailer and ½- to 1-1/2-inch 18 crown staple combo tool
• Adjustable depth dial; tool-free directional exhaust; 135 in./lbs. driving power
• Nail lock-out feature eliminates dry firing; magazine holds 100 nails

This is a factory reconditioned product. Reconditioned generally means that the product has been returned to the manufacturer, who brings the product back to like new condition. Some products may contain cosmetic blemishes. Includes Brad Nailer / Finish Stapler Combo - U/SB-2IN1, Carrying Case

Paslode 902200 Orange Fuel Cell #812299 for use in CF325 Framing Nailer

Paslode 902200 Orange Fuel Cell #812299 for use in CF325 Framing Nailer Review

Paslode 902200 Orange Fuel Cell #812299 for use in CF325 Framing Nailer Feature

• Drives 1200 nails guaranteed
• Easy to use
• No snapping or twisting, just load and go!
• For use with Paslode CF325 Cordless Framing Nailer part# 902200
• This item is not for sale in Catalina Island

Paslode Quick-Lode spare framing fuel cell has PowerBoost black tip coating that drives nails deeper into tough lumber even LVL. Fuel Cells are sold as each and have a shelf life of 21 months.

SHOVEL DH ROOF PRO WOOD HNDL

SHOVEL DH ROOF PRO WOOD HNDL Review

SHOVEL DH ROOF PRO WOOD HNDL Feature

• "MINTCRAFT PRO " ROOF RIPPERS
• Notched edge
• Best for removing shingles.
• For removing tar and rolled roofing
• Industrial guage tempered steel.

Best for removing shingles.